Automatics Lens Edgers from France Second Hand,Essilor, Briot, Nidek, Weco, Huvitz
Category: Mr Blue L14
Mr Blue TRACER – AUTOMATIC CENTERER – BLOCKER
L14 Mr Blue tracer will provide you Frame tracing with Automatic binocular tracing in 3 dimensions. Also, add to it, the High-precision cycle with groove profile measurement and Advanced high base cycle. However, the optical Tracing Demo lenses or Pre-cut lenses are 2 dimensions ones. Also an Automatic centering: Unifocal, Progressive, Bifocal and Executive lenses for UF lenses:
Optical centre detection from -20.00 to +20.00 D Sphere and cylinder measurement from -6.00 to +6.00 D
So, the Manual Centering: 2-channel optical system offer you an Automatic identification of focimeter points. Special centering for High Base lenses Shape modification: Scaling, B-dimension and ½ B-dimension, A-dimension and ½ A-dimension Blocking: Automatic loading of the lens block. Lens block removal in the job axis And built-in database : Shapes and drilling parameters
W320 x D520 x H700 mm 25 Kg 250 W 240-100 V~ 60/50 Hz 5-3 A
First of all, your machine should preferably be installed on a perfectly flat and stable work surface of suitable height (about 70 cm), free from shocks and vibrations, to benefit from the high accuracy of your tracer-centerer-blocker. But also your tracer may be installed on the right or left of your edger. Always the tracer may be installed up to 5 m away from the edger (a 5 m cable is supplied with the edger). To this end longer cables are also available on an optional basis. Thus the temperature and the humidity of the room where you use your machine must be within the following ranges of values: Operation: temperature between +10 °C and +40 °C Humidity: between 30% and 75% Storage: temperature between -5 °C and 50 °C Humidity: between 25% and 95% Altitude: < 2,000 m And level of pollution: 2
PRECAUTIONS OF USE:
Also avoid sudden changes in temperature and humidity and install your system: In fact, your set must be in an area not directly exposed to sunlight and away from all heat sources, or away from all strong magnetic fields. Moreover, of course put away from all chemical products, corrosive vapours and liquids. Always take care not to block the vents and to leave enough space above the device.
Then, don’t place any object on the device. And avoid exposing the device to vibrations or shocks. As a consequence, the back of your machine must be at least 20 cm away from a wall.
TRACER CENTERER BLOCKER L14
In the first place, this mechanical tracing offer you the possibility of a Frame tracing in 3 dimensions. However, note that the tracing of patterns, demo lenses or recut lenses is only on 2 dimensions.
In effect, in order to benefit fully from the functions of your Mr Blue 2.0 edger, we advise you to consult us and take time to read Essilor Manual User.
Otherwise, the Step Bevel function allows you to produce specific bevels adapted to the frames that have an asymmetrical groove.
Thus, at the forefront of innovation, Mr Blue has positioned himself, since its launch, as a true partner for opticians. It’s why Essilor enriched with new features and with extended flexibility, Mr Blue is armed more than ever as the solution for Work at the cutting edge of technology, also Differentiate your store’s offer, and then Optimize the cutting activity.