Automatics Lens Edgers from France Second Hand,Essilor, Briot, Nidek, Weco, Huvitz
Category: Kappa M10
Essilor Kappa edger M10
Edging in Boxing mode (passive) or Optical mode (active).
Digital edger with restitution of bevel in 3 dimensions.
Simultaneous tracing of front and back surfaces of the lens.
Customised bevel: frame-base curve tracing, tracing the eye shape, balanced bevel (%), front surface tracing, back surface tracing, partial and overall adjustment, displacement.
Grooving: the depth and width of the groove are adjustable (increments of 0.05) – automatic groove, base follow-up, groove distribution (%), front surface follow-up, back surface follow-up, partial and overall adjustments, displacement.
Chamfering : front and back – plastic and polycarbonate
Specific programs for tangent lenses
Three-dimensional display of bevel and groove before the start of the cycle.
Zoom on bevel and groove.
Setting and display of lens clamping pressure (3 levels).
Tool bar customising.
Possibility of creating edging programs (macro-function).
Control of machining time according to the shape to be machined.
Control of edging pressure according to material.
Automatic wheel cleaning cycle.
Lens edging capacity:
maximum diameter: 110 mm
Diameter: 18 mm for flat edge, 19.5 for bevel l Versions 2, 3 or 4 wheels (according to material): glass, plastic, composite and polycarbonate edging, polishing.
Display of JOB number.
Possibility of network operation: maximum of 32 units => tracer-centerer-blockers + edgers + PC.
Built-in automatic maintenance functions.
Dimensions of colour LCD screen: 158.40 x 209.00 mm.
Size: L 535, D 410, H 568 mm.
Weight: 67 kg.
Voltage : 230 V – 50/60 Hz or 115 V – 50/60 Hz.
Electrical consumption: 1350 W – 10 A for 230 V and 15 A for 115 V.
Double-pole cut-out switch Average water consumption:
CR 39 glass and MHI: 4 litres/min.
Polycarbonate: 5 litres/min.
Noise level measured while grinding, at a distance of 0.5 m from the machine: